close

Se connecter

Se connecter avec OpenID

CHEMDUR POLYASPARTIC polyaspartic coating for floors.

IntégréTéléchargement
mc
8361177 Canada Inc.
140 Boul. ST-Joseph Lachine, Qc H8S 2L3
Tél: (514)-639-6662 • 1 (866) 639-6662 • (514) 639-4440
CHEMDUR POLYASPARTIC
POLYASPARTIC COATING FOR FLOORS
Page 1
www.chemdur.com • Chemdur@chemdur.com
Description
CHEMDUR POLYASPARTIC is a two components polyaspartic coating, solvent free, 100% solids,
polymerization at room temperature, indoor and outdoor use.
The product is designed as an U.V resistant durable protective coating for a variety of support surfaces
subjected to severe conditions of service: concrete, masonry, wood, plywood cons, signs of asbestos-cement or
drywall. Provides a tough finish, resistant to many common chemicals products.
BENEFITS
Indoor and outdoor application.
Secure with little odor: free of volatile and flammable solvent.
Excellent resistance to UV.
Remains flexible: shock resistant.
Outstanding adhesion to concrete, wood.
Superior resistance to abrasion (wear).
Good resistance to common chemicals.
Easy to clean and maintain, making the workplace more healthy.
Durable, waterproof, seamless and esthetically.
Complies with VOC Regulations across North America.
Can Contribute to LEED points.
TYPE
Glossy transparent and colored
FINISH
Self-leveling (20-25 mils)
USES
New work or maintenance of concrete floor.
Factories, warehouses, garages, institutions, hospitals, recreation centers, balconies, laundry rooms, locker
rooms, food, etc.
Data in this bulletin are based on our experience and present
our best judgment in the matter. They are given for information
only as we cannot assume responsibility for operations beyond
our control.
Les renseignements donnés dans ce bulletin sont bases sur notre
experience et représentent notre opinion la plus sincere. Ne pouvant
assumer la responsabilité d’opérations hors de notre controle, nous
Donnons ces renseignement s a titre d’information seulement.
mc
8361177 Canada Inc.
140 Boul. ST-Joseph Lachine, Qc H8S 2L3
Tél: (514)-639-6662 • 1 (866) 639-6662 • (514) 639-4440
CHEMDUR POLYASPARTIC
POLYASPARTIC COATING FOR FLOORS
Page 2
www.chemdur.com • Chemdur@chemdur.com
RESTRICTIONS
New concrete must be left for at least three weeks.
The moisture in the concrete should not exceed 4.25% during application.
The concrete should be cleaned and prepared to achieve a laitance and contaminant free surface.
Under conditions of high humidity, pot life will be reduced.
Do not apply in areas where the HR is greater than 80%.
The coating is a vapor barrier should not be exposed to hydrostatic pressure. The slab on grade must have a
vapor barrier.
Lower temperatures extend curing.
For best results, the ambient temperature and the surface to be covered must be at least 10 º C during
application and curing period.
SURFACE PREPARATION
CONCRETE
Must be free of any curing membrane or sealer. Laitance, oil, grease, rust, wax or other substances which may
interfere with proper adhesion must be removed.
The surface must be solid, dry, and dust-free.
WOOD
Sand, Clean and Prime
OLD EPOXY
Preparation by mechanical or chemical stripping. Apply a coat of primer CHEMDUR P1085, wait for it to dry
before applying the polyaspartic coat.
FOR SOILS
Preparation by mechanical or chemical stripping.
REPAIRS
Patching holes or cavities with epoxy mortar CHEMDUR PATCH or reinforced mortar.
Data in this bulletin are based on our experience and present
our best judgment in the matter. They are given for information
only as we cannot assume responsibility for operations beyond
our control.
Les renseignements donnés dans ce bulletin sont bases sur notre
experience et représentent notre opinion la plus sincere. Ne pouvant
assumer la responsabilité d’opérations hors de notre controle, nous
Donnons ces renseignement s a titre d’information seulement.
mc
8361177 Canada Inc.
140 Boul. ST-Joseph Lachine, Qc H8S 2L3
Tél: (514)-639-6662 • 1 (866) 639-6662 • (514) 639-4440
CHEMDUR POLYASPARTIC
POLYASPARTIC COATING FOR FLOORS
Page 3
www.chemdur.com • Chemdur@chemdur.com
PROPERTY
Presentation
: Two components product
Mixing Ratio, by volume
: A/B, 4/3
Pot life (100g mass @ 21 º C)
: 15 min.
Viscosity
: Part A 1200 mPa
Part B 500 mPa
Solids
: 100%
Flashpoint
:> 200 º C
Cure Time
(@ 21 º C)
Dry to touch
To cover
: 1 hour
: 3 hours
Circulation
Pedestrian
Vehicular
: 4 hours
: 24 hours
Chemical Resistance
: 7 days
Storage
: Minimum one year in the original packaging
Data in this bulletin are based on our experience and present
our best judgment in the matter. They are given for information
only as we cannot assume responsibility for operations beyond
our control.
Les renseignements donnés dans ce bulletin sont bases sur notre
experience et représentent notre opinion la plus sincere. Ne pouvant
assumer la responsabilité d’opérations hors de notre controle, nous
Donnons ces renseignement s a titre d’information seulement.
mc
8361177 Canada Inc.
140 Boul. ST-Joseph Lachine, Qc H8S 2L3
Tél: (514)-639-6662 • 1 (866) 639-6662 • (514) 639-4440
CHEMDUR POLYASPARTIC
POLYASPARTIC COATING FOR FLOORS
Page 4
www.chemdur.com • Chemdur@chemdur.com
TYPICAL PHYSICAL PROPERTIES
Strength (ASTM D 4541)
(@ 100% concrete failure)
: 500 psi
Hardness (ASTM D-2240-Shore D)
: 80 to 85
Abrasion resistance (ASTM D-4060)
(CS17 wheel, 1,000 revolutions
1000g load)
: 60 mg loss
Chemical Resistance
ASTM 1308, covered, 7days.
REACTIVE
Detergent solution (5% Ajax), sodium chloride 20%
calcium chloride 20%, 20% ammonia,
baking soda 10%, caustic soda 10%, 3% Javex, ,
methanol, toluene, xylene, hydrochloric acid 5%,
citric acid10%, lactic acid 5% unleaded
coffee, tea, beer
Nitric acid 10%
Sulphuric acid 10%
Storage
RESULT
Unaltered
Some yellowing.
Slightly discolored
: Minimum one year in the original packaging
DIRECTIONS
MIXING
Pre-mix each component separately before testing in a clean container. Mix Parts A and B together for at least 1
min, either manually or using an electric mixer at low speed. Prepare only the amount that can be applied during
the pot life.
APPLICATION
Data in this bulletin are based on our experience and present
our best judgment in the matter. They are given for information
only as we cannot assume responsibility for operations beyond
our control.
Les renseignements donnés dans ce bulletin sont bases sur notre
experience et représentent notre opinion la plus sincere. Ne pouvant
assumer la responsabilité d’opérations hors de notre controle, nous
Donnons ces renseignement s a titre d’information seulement.
mc
8361177 Canada Inc.
140 Boul. ST-Joseph Lachine, Qc H8S 2L3
Tél: (514)-639-6662 • 1 (866) 639-6662 • (514) 639-4440
CHEMDUR POLYASPARTIC
POLYASPARTIC COATING FOR FLOORS
Page 5
www.chemdur.com • Chemdur@chemdur.com
Brush, roller hair short ("mohair") or spraying.
The interval between successive layers must not exceed 24 hours. Otherwise, you must lightly sand the
hardened layer to ensure good adhesion.
SECURITY
Keep away from open flame and sparks.
May cause dermatitis.
Protect eyes and skin.
Wear glasses and gloves resistant to chemicals.
Provide adequate ventilation.
Wash with soapy water, rinse with water.
If irritation occurs, consult a doctor immediately.
For more information consult MSDS CHEMDUR POLYASPARTIC.
KEEP OUT OF REACH OF CHILDREN - FOR INDUSTRIAL USE ONLY.
Data in this bulletin are based on our experience and present
our best judgment in the matter. They are given for information
only as we cannot assume responsibility for operations beyond
our control.
Les renseignements donnés dans ce bulletin sont bases sur notre
experience et représentent notre opinion la plus sincere. Ne pouvant
assumer la responsabilité d’opérations hors de notre controle, nous
Donnons ces renseignement s a titre d’information seulement.
Auteur
Документ
Catégorie
Без категории
Affichages
4
Taille du fichier
194 Кб
Étiquettes
1/--Pages
signaler